[Kernel][Android 4.1.1 JB] Dual Boot Siyah-Kernel Galaxy S3 GT-I9300 JellyBean

Diskutiere [Kernel][Android 4.1.1 JB] Dual Boot Siyah-Kernel Galaxy S3 GT-I9300 JellyBean im Samsung Galaxy S3 Custom Rom / Mod Forum im Bereich Samsung Galaxy S3 Forum; Zum Diskussionsthread gehts hier lang...
Status
Für weitere Antworten geschlossen.
M

Mr. Green

Gast
Zum Diskussionsthread gehts hier lang: http://www.usp-forum.de/samsung-galaxy-s3-custom-rom-mod/88599-diskussionsthread-siyah-kernel-f-r-samsung-galaxy-s3-gt-i9300.html

GokhanMoral, Entwickler des SiyahKernel, hat nach einigen Tagen schon den ersten, auf Quell-Text basierenden, Android 4.1. Jelly Bean Kernel für das Galaxy S3 I9300 veröffentlicht.




Info sind auf der Siyah-Kernel Homepage zu entnehmen und zusätzlich auf der Entwickler-Seite auf dem XDA-Developers-Forum:


[KERNEL][STweaks][Eargasm][exfat][NTFS][GESTURES][JellyBean] SiyahKernel S3 v1.6.1 - xda-developers
SiyahKernel for S2 & S3 | "One kernel to rule them all"



AB VERSION 1.6 IST DER KERNEL NUR FÜR CM10 UND ORIGINAL SAMSUNG-FIRMWARE ANDROID 4.1. JELLYBEAN




FEATURES:

  • Supports both Samsung and CM10 with a single kernel image
  • CPU over/underclock: 200-1600MHz 14-steps
  • GPU over/underclock: 54-700MHz
  • 5-step GPU clock
  • CPU underclock (600mV-1500mV). vdd_levels and UV_mV interfaces.
  • Insecure adbd
  • triangle-away app support
  • added hotplug governor and modified it to support quad-core
  • Auto-root. You can also remove root via STweaks app and install it without rebooting your phone again. Auto-root can be disabled as well.
  • You can completely disable android logger using STweaks app
  • Adjustable charging speeds for AC and USB
  • Cpu governor optimizations
  • Available CPU Governors: Pegasusq (default), Hotplug, Lulzactiveq
  • CIFS as module
  • Available I/O schedulers: CFQ(default), noop, Deadline, SIO, V(R)
  • init.d support
  • default idle mode is IDLE+LPA (highly recommended). however you can change the default to AFTR+LPA using STweaks.
  • Automatic EFS Backup
  • Samsung proprietary ExFat modules are loaded
  • Lots of I/O tweaks and filesystem optimizations via some parts of thunderbolt scripts.
  • Kernel based gestures support by Tungstwenty. See http://forum.xda-developers.com/show....php?t=1831254
  • NTFS automounting for USB sticks. When you plug in an NTFS formatted USB flash it will be automatically mounted to /mnt/ntfs folder.
  • Almost everything is configurable such as scheduler features, hotplug thresholds, GPU voltages, arm topology modes... and they are configurable via simple and free STweaks (included in the kernel) or ExTweaks App from Google Play
  • mDNIe negative effect toggle with home button (press it four times). the purpose of this feature is to inverse the colors especially when the background is white or bright. making the background darker will make your battery last longer.
  • sound boosting for great headphone experience (partial-port of wm8994 based implementation from project-voodoo since our wm1811 is mostly register compatible and almost the same)
  • and some more not worth mentioning as separate items such as disabling mali state tracking and disabling some unnecessary debugging etc..

Zum Diskussionsthread gehts hier lang: http://www.usp-forum.de/samsung-galaxy-s3-custom-rom-mod/88599-diskussionsthread-siyah-kernel-f-r-samsung-galaxy-s3-gt-i9300.html
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[Kernel][Android 4.1.1 JB] Siyah-Kernel für das Galaxy S3 GT-I9300 Jelly Bean

SiyahKernel S3-v1.6.8

This kernel is for JellyBean only, Samsung or CM10

charge boost (for AC: up to 1200mA, for USB: up to 900mA)

Auto NTFS mounting to /mnt/ntfs after attaching an NTFS formatted USB stick

Audio enhancements, call it scoobydoo sound, eargasm or whatever (fully functional in v1.6b3)

Overclocking (changes 1400 step to 1500 or 1600, available in v1.6a5)

Some tiny script based tweaks…

Undervolting support, but works with nstools only. Used Ezekeel’s customvoltage interface. it is very similar to netarchy’s UV_mV_table and you can use your existing scripts with some little modification. I have also added vdd_levels (don’t know who implemented this) and AndreiLux’s UV_uV_table interfaces but they are in /sys/class/misc/customvoltage. Lowest voltage level is 850mV until the sources are released. Disabled some logs(available in v1.6a6)

added lulzactiveq (not tweaked for s3 yet) and hotplug governors (v1.6a7)

removed the settings which are not available yet from STweaks (1.6a8)

mdnie sharpness tweaks from hardcore (1.6a9)

added kernel version to version string to let you see which SiyahKernel version you have. 4-step gpu clock settings (clock and thresholds), with 533MHz option and with some limitations because of the lack of voltage settings (v1.6beta10)

mDNIe sharpness tweaks made optional, in STweaks/Screen tab (v1.6beta11)

SIO and V/R I/O Schedulers, CIFS and NFS modules. GPU undervolting (lower limit:850mV, upper limit: 1075mV until the kernel is compiled from the sources) (v1.6beta12)

support for setcpu, voltagecontrol and similar apps which are using universal UV interfaces. added 1.6GHz and 1.5GHz CPU freq steps. no longer modified 1.4step for overclocking. (v1.6beta13)

fixed some modules not being loaded (v1.6beta14)

fixed vdd_levels path to fix STweaks undervolting settings not being applied , adjusted regulator limits (850mV -> 600mV), configurable touchboost freq (v1.6beta15)

added gesture support, mdnie toggle with home button, swap & zram (v1.6rc1)

5-step GPU, new frequency steps for GPU, gpu boost on touch and some other GPU related modifications/cleanup. removed zram settings from samsung’s init.rc and added it back to stweaks. (v1.6rc2)

mali as module (this version supports both Samsung JB and CM10 ROMs). removed swap & zram. fixed gpu clock setting problem. removed gpu boost temporarily. updated UMP driver. Added arm topology support again with cpupower driver. better loadavg calculation (thanks to AndreiLux for his merges from upstream) (v1.6rc3).

removed 900mV GPU voltage limit. fixed GPU voltage settings not being applied on boot. initramfs updates. fixed audio enhancements reset in some conditions. (v1.6)

v1.6.1 -> v1.6.2: cleaned ICS leftovers from ramfs. adjusted maximum GPU voltage constraint (1075mV->1400mV). increased default GPU voltages by 25mV. This version will reset all your STweaks settings to defaults. Enabled swap (still no zram).

v1.6.2 -> v1.6.3: change packet filter settings to block multicast (thanks to Entropy512). fixed mali UMP mistakes which might be causing problems on Samsung ROMs. Reverted mali cpu lock levels to stock.

v1.6.3 -> v1.6.4: new CPU steps (1700MHz & 1800MHz) (thanks to AndreiLux as I used his kernel and multipliers while making the changes). fixed mali module related problems. fixed lockup problem while charging the device when it is off. reverted most of the changes back to v1.5 state which were removed during the lag-hunting process (discrete wakelocks, gestures, voltages…etc).

v1.6.4 -> v1.6.5 re-adjusted regulator constraints which were lost because of the removed module. fixed touch boost setting. enabled swap.

v1.6.5 -> v1.6.6: changed TMU thresholds a little. fixed freq scaling stuck at some frequencies. removed cfs tweaks from stweaks. some experimental process priority modifications to have better UI experience. most of the custom modules are now linked into the kernel and not loaded as modules. lulzactiveq tweaks.

v1.6.6 -> v1.6.6i: one line fix for freq being stuck at 1704MHz. changed process thresholds a little.

v1.6.6i -> v1.6.7: removed last remaining module and linked it into the kernel (mdnie_mods). Made all mdnie variables configurable via misc device (all in /sys/class/misc/mdnie). Hardcore’s sharpness tweaks are converted into a script to use the new interface as an example.

v1.6.7->v1.6.8: fixed mdnie sharpness tweaks causing strange artifacts on boot animation. removed process priority tweaks. removed some unnecessary patches. Enabled GENTLE_FAIR_SLEEPERS in default profile (either enable yourself if you are an existing user or reset stweaks if you want it to be enabled). You will see siyahkernel logo as I made this release while working on dual booting and did not spend any time to remove those, create “.nobootlogo” file in your internal sdcard if you find it too disturbing. Fixed setcpu showing 1704 when overclocked to 1700.
Download:
TAR VERSION

CWM VERSION
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[Kernel][Android 4.1.1 JB] Siyah-Kernel für das Galaxy S3 GT-I9300 Jelly Bean

SiyahKernel S3-v1.7

Dual-booting (supports only JB ROMs: Samsung JB and CM10)

fixed a UMP related bug in v1.6.8 that was causing lags for CM10 users

removed CPU locking when GPU freq >=440MHz

alternate touch recovery for secondrom related operations

Alternate CWM-recovery based 2ndROM utils which can be used via STweaks. No more custom recovery.

Added “no boot logo”, “Reboot into 2ndROM Utils”, “Reboot into First ROM” and “Reboot into Second ROM” options to STweaks.

“Black Crush Fix” by AndreiLux.

car dock support.

Added this to ramfs (thanks to Oranav@XDA) to fix EasyUMS compatiblity in cm10.

new STweaks (500% faster startup, retouched UI ) which is also available on Google Play

applied wifi changes in CM10 repo to fix wifi tethering problem.

Based on update6 sources.

added discrete wakelock stats and gestures (both by Tungstwenty) back.

dns_resolver and md4 modules are linked into the kernel, so loading cifs will be enough to use smb shares.

single image for kernel and recovery, if you flash it to boot partition it is a kernel, if you flash it to recovery it is a CWM-based custom recovery (hijack-recovery is available in STweaks to flash the kernel as a custom recovery).

added cm10′s wireless driver as a separate module.

increased mmc timeout even more. added default ROM selection in STweaks.

disabled gpu resume freq and gpu boost completely.

tweaked pegasusq a little more. ramfs updates for samsung and cm10.

ported slide2wake from fluxi’s implementation (WIP. still need some more work).

back to new MTP driver.
TAR VERSION

CWM VERSION
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
SiyahKernel S3-v1.8

rebased on Samsung’s N8020 sources (mainly some CMA_DMA changes/fixes/optimizations, driver & platform code changes and some additional pegasusq logic)

fine tuning on pegasusq governor

some tiny ramfs changes such as adding governor selection back to STweaks
TAR VERSION

CWM VERSION
 
M

Mr. Green

Gast
SiyahKernel S3-v1.8.4

Ported CPU UV tab from AndreiLux’s STweaks config

Dynamic generation of STweaks config and initial GPU voltages are set correctly (mostly based on AndreiLux’s uci.sh script interface while trying to keep the changes minimum to support other guys using my scripts as base)

Workaround for CRT animation problem (at the bottom of the screen tab in STweaks)

fixed the problem of copying large files that some users experience

removed custom modifications from pegasusq governor and changed the tweaked values a little

v1.8.1 -> v1.8.2: fixed gpu voltage problems

v1.8.2. -> v1.8.3: fixed problem of fb earlysuspend delay not being persisted across reboots. removed automatic installation of stweaks (you can find it on google play).

v1.8.3 -> v1.8.4: reverted VM_MAX_READAHEAD commit. adjusted cpu hotplug in/out rates in pegasusq because they were just too low after decreasing the sampling time.
Download: Dev-Host - The Ultimate Free File Hosting / File Sharing Service
 
Status
Für weitere Antworten geschlossen.
Thema:

[Kernel][Android 4.1.1 JB] Dual Boot Siyah-Kernel Galaxy S3 GT-I9300 JellyBean

Sucheingaben

siyah kernel galaxy s3

,

pegasusq lulzactiveq hotplug

,

galaxy s3 dual boot

,
dual boot galaxy s3
, siyah kernel, siyah kernel i9300, i9300 dual boot, jb kernel i9300, samsung s3, siyah s3, s3 dual boot, siyah kernel galaxy s2 download, siyah kernel gt i9300, jelly bean custom rom s3, karnel siyach s3 dla 4.1.1, i9300 siyah kernel, galaxy s3 siyah dual boot, samsung galaxy s3 siyah kernel indir, dual boot siyah s3, siyah kernel flashen s3, how to dual boot galaxy s3 i9300, s3 siyah, siyahkernel samsung galaxy s3 shows the picture of siyah, siyah jelly bean script galaxy s3, download siyah kernel galaxy s3

[Kernel][Android 4.1.1 JB] Dual Boot Siyah-Kernel Galaxy S3 GT-I9300 JellyBean - Ähnliche Themen

  • [Kernel] Android 4.1.2 Jelly Bean CyanogenMod 10 - 1.4GHZ - Galaxy Tab 10.1

    [Kernel] Android 4.1.2 Jelly Bean CyanogenMod 10 - 1.4GHZ - Galaxy Tab 10.1: Samsung Galaxy Tab 10.1 Custom-Kernel Quelle: Droid Basement und HIER Dieser Kernel ist für alle Versionen des Galaxy Tab 10.1 geeignet. Das...
  • [Kernel][Android 4.0.4 ICS] Siyah-Kernel für das Galaxy S3 GT-I9300

    [Kernel][Android 4.0.4 ICS] Siyah-Kernel für das Galaxy S3 GT-I9300: Zum Diskussionsthread gehts hier lang...
  • Gravierende Lücke im Linux-Kernel entdeckt (auch Android-Kernel)

    Gravierende Lücke im Linux-Kernel entdeckt (auch Android-Kernel): Der Linux-Kernel hat seit Version 2.6.39 eine gravierende Schwachstelle mit der, durch Auslesen eines Speicherauszugs, Root-Rechte erworben werden...
  • Weitere Android-Patches für Linux Kernel 3.4

    Weitere Android-Patches für Linux Kernel 3.4: Der Entwickler John Stultz vom Linaro-Projekt hat neue Patches für den Linux-Kernel 3.4 eingereicht, die vom Android-Kernel stammen. Ziel des...
  • Linux Kernel 3.3 ist da: Neues für Desktop, Server, Android

    Linux Kernel 3.3 ist da: Neues für Desktop, Server, Android: Reduzierter Stromverbrauch, Teaming-Treiber fasst Ethernet-Ports zusammen, Android-Entwicklungen fließen zurück. Nach insgesamt sieben Release...
  • Ähnliche Themen

    Oben