[Kernel] Siyah-Kernel Galaxy S2 I9100 Dual-Boot

Diskutiere [Kernel] Siyah-Kernel Galaxy S2 I9100 Dual-Boot im Samsung Galaxy S2 Custom Rom / Mod Forum im Bereich Samsung Galaxy S2 Forum; Hier sind die Stable/Release-Versionen: SiyahKernel S2-v5.0.1 DOWNLOAD TAR (for Odin) DOWNLOAD ZIP (for CWM Recovery) SiyahKernel S2-v4.1.5...
M

Mr. Green

Gast
Hier sind die Stable/Release-Versionen:

SiyahKernel S2-v5.0.1

Dual booting with new CM10 + Samsung ICS ROM

improved touch sensitivity

5-step GPU

added arm topology patches again, with cpupower driver.

merged with a JB leak (3.0.31)

removed dynamic cpu freq steps. they are all fixed now.

removed some settings from ExTweaks interface such as cfstweaks

orbot is now working (only tested on Samsung ROM)

Reboot into 1stROM, Reboot into 2ndROM in STweaks. (v5.0a2)

STweaks added to initramfs. it will be autoinstalled only once. it is my own implementation of uci.sh interface. There is almost no difference (except for resetting to defaults in the last tab) between ExTweaks and STweaks. It’s been used for some time in my S3 kernel and fairly stable. I wanted to put it in the last version of my S2 kernel as well. it is my second android app (first one is FastDormancy app).. it doesn’t have a fancy UI but not bad for a beginner .

BLNWW (BLN Without Wakelock).

Touch gestures optimizations (thanks to Tungstwenty for the latest changes and for this great feature).

added speaker and mic amplification/sensitivity settings which are based on fluxi’s mc1n2 interface, reversed and ported to uci.sh interface by dorimanx, tested and committed to my initramfs by robertobsc.

automatic led brightness level. touch voltage level will be ignored if this one is checked in STweaks

added B2G support (thanks to [email protected] for the initramfs changes).

added an option in STweaks to set a delay in FB earlysuspend to properly play CRT animation (implemented originally by Codeworkx).

reverted wifi driver to the one in cm10 kernel

fixed auto-brightness issue on CM10.

fixed some 2ndROM related problems in recovery when installing zips or restoring backups

fixed BLN intensity when auto led brightness is selected.

applied latest lulzactiveq tweaks from robertobsc.

mali and vsync related changes (mostly from Entropy512′s commits) which are supposed to improve the battery life

removed battery and performance profiles.

removed lots of cpu governors. available governors: pegasusq, ondemand, conservative, hotplug, lulzactiveq

new optional GPU frequency steps. enable VPLL Mode in STweaks but make sure you read the description.

fixed a CM10 specific problem with the new GPU steps but it still doesn’t guarantee that the new steps will be stable on your device.

added slide2wake (thanks to Fluxi) + some optimizations

added mdnie interface and made hardcore’s sharpness tweaks optional in STweaks

lulzactiveq fixes by robertobsc and added cpu governor selection back to stweaks

Finally fixed vpll problem and made it default (thanks to robertobsc for his helps on testing)

v5.0i -> v5.0.1: reverted wifi driver to fix wifi direct & other wifi related problems. touch gestures off when screen is off. analogue headphone amp in stweaks. new & faster stweaks. mxt224e touchscreen choppiness fix.

DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)

SiyahKernel S2-v4.1.5

CWM-Based Touch Recovery v6.0.1.1

fixed led timeout not being saved

new GPU frequency steps: 54, 108, 133, 160, 266, 330, 400, 440, 520MHz (Removed in beta4)

added one more GPU step, we now have 4 GPU steps with 108, 160, 266, 330MHz defaults. (Removed in beta4)

added ntt docomo gps support again (ntt-docomo users can use their previous scripts to get gps working)

fixed movfilter not being changed with kmemhelper (should fix touch sensitivity problems)

removed 25MHz and 50MHz CPU steps

fixed led activity on brightness change

ExTweaks settings will be reset because of GPU changes. if you revert back to a previous version make sure you reset ExTweaks settings manually.

update beta1 -> beta4: fixed gamma shift not working in ExTweaks. removed all gpu modifications to make sure we have no problems with other parts. some users (including me) experienced no problems with new gpu steps whereas some users had kernel panics when the screen is off. Consider v4.1beta4 as 4.0.2 with linux 3.0.40 and cwm-based recovery 6.0.1.1.

update beta4 -> beta5: gesture support by Tungstwenty (sample flashable zip) here is the XDA thread. some minor fixes in ExTweaks. swappiness set to 90 (effective only if you are using zram or swap). removed battery and performance profile settings during the beta phase (they will be the same as default settings)

update beta5 -> beta6: removed additional gpu steps and new frequencies

update6 -> rc1: revert back to 3.0.15 with only several cherry-picks from upstream. updated CWM-based recovery to the latest with backup type selection (dup or tar). fixed the problem of not booting after wiping data/cache. lots of refactorings and cleanups. Number of gestures increased from 10 to 30 (by Tungstwenty).

rc1 -> release:
4 gpu steps (100,160,200,266MHz default).

gpu boost on touch to prevent UI lags (gpu freq will be set to step2, 160MHz in default set, for one second after you touch the screen).

pegasusq behavior modified and tweaked.

CWM-based recovery updated to 6.0.1.2.

fixed mounting the internal sdcard in recovery. fixed user gamma settings.

Tested backup&restore using nandroid dedupe and tar formats (tar format may not be compatible with previous version. make sure you create new backups after you install the kernel).

made a small modification in init script to create “.nomedia” files in clockworkmod folders to prevent media scanning on blob folder

.update 4.1 -> 4.1.1: fixed the problem with external sdcard in some roms because of forgotten unmount in init script.

update 4.1.1 -> 4.1.2: added lulzactiveq (added hotplug logic and some fixes & tweaks, by [email protected]). fixed recovery not being usable with 3-button combo. set default backup format to tar in recovery. some other initramfs changes & fixes.

update 4.1.2 -> 4.1.3: decreased mali sampling interval (thanks to AndreiLux). removed zram settings from ExTweaks. some gpu boost fixes. lulzactiveq fixes. reverted some changes (mostly TMU related). chargeboost in LPM. fixed adbd problem for JB ROMs. lots of cherrypicks from cm10 kernel. initramfs fixes.

update 4.1.3 -> 4.1.4: fixed vibration intensity problem with samsung roms. fixed adb in recovery. compiled with linaro 4.7 (2012.08) toolchain. fixed mass storage mounting problem.

update 4.1.4 -> 4.1.5: fixed /mnt/ntfs directory creation problem (ntfs mounting over usb otg should be working now). lulzactiveq (and one of my mistake in lulzactive) fixes by [email protected] enabled NFS module (if you don’t know what it is then you don’t need it)

Downloads:

Dev-Host - The Ultimate Free File Hosting / File Sharing Service

DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)

SiyahKernel v4.0.1

based on update7 sources

supports Samsung 4.0.3/4.0.4 (no camera problem), CM9, CM10 and MIUI

all the changes from v3.5.2 are applied

no CAP_ERASE, no hardbrick

fixed CM10 led behavior

fixed led_fadeout behavior

fixed autorotation problem with CM10 and 4.0.3 ROMs

enabled swap and zram options in config. enabled zram as default with 150MB swap. you can disable it in extweaks.

Update v4.0 -> v4.0.1: some changes in initramfs to fix boot problems with some ROMs.

Download: Dev-Host - The Ultimate Free File Hosting / File Sharing Service

SiyahKernel v3.5.2

added Jellybean support

updated wireless driver (1.15.12 -> 1.15.15)

replaced superuser with supersu (only when autorooting, your existing app won’t be replaced)

updated modem driver

removed some unused binaries from initramfs

Linux 3.0.38

Update 3.5 -> 3.5.1: fixed brightness and led problems. changed compression to gzip for faster boot (increased size)

update 3.5.1 -> 3.5.2 fixed CM10 booting problem

DOWNLOAD TAR (for Odin)

DOWNLOAD ZIP (for CWM Recovery)

SiyahKernel v3.4.1

Changelog:

based on i9100 update6 sources

fixed /vendor symlink for cm9/aosp roms

Linux 3.0.37

Update 3.4 -> 3.4.1: bluetooth fix to work on 4.0.4 based ROMs (by tungstwenty)

DOWNLOAD TAR (for Odin)

DOWNLOAD ZIP (for CWM Recovery)

SiyahKernel v3.3.3d

pegasusq fixes and tweaks

added cfs tweaks settings to ExTweaks (samsung default, linux kernel default and thunderbolt script defaults)

added Tungstwenty’s implementation that let’s us see deleted wakelock details (optional in ExTweaks)

cherry-picked some wifi changes/fixes from cm9 repo

added mdnie negative effect toggle to ExTweaks (by Tungstwenty)

and some other tiny changes…

removed some potentially unsafe changes which might be the reason of some users having problems with the latest release.

added ntt device gps support back. removed exfat related mess. added Entropy512′s patch to prevent multicast packets for added headphone amplification setting to extweaks (named it soundgasm). fixed data statistics and some other changes in config and sources…

main wakelock fix by tungstwenty

Linux 3.0.36

DOWNLOAD TAR (for Odin)

DOWNLOAD ZIP (for CWM Recovery)

SiyahKernel v3.3.2

USB mode selection in ExTweaks (default, force mass storage, force mtp)

some tweaks & patches from upstream

GENTLE_FAIR_SLEEPERS and ARCH_POWER selection in ExTweaks

battery charging animation, service and lpm.rc from CM9

wifi country code lookup part delegated back to the driver code

Linux 3.0.34

DOWNLOAD TAR (for Odin)

DOWNLOAD ZIP (for CWM Recovery)

SiyahKernel v3.3.1

removed lots of experimental patches and merges.

Linux 3.0.33

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2.8.2

lots of merges with n7000 update3 sources (/kernel /mm /fs /block /net)

and some platform specific merges (cpufreq driver and usb related)

this release is probably the last v3.2 version. in v3.3beta I will use i9300 base and have a single repository for i9100 and i9300, which requires a little more time than I have now.

XZ compression because new flags and features make the kernel to exceed 8MB with gzip compression.

update(6/4): reverted n7000 modem driver because of h2_lsic wakelock problem. reverted fs and scsi related merges which might be the reason of some people having bootloops.

Download:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2.7.1

fixed triangleaway support. boot partitions are not hidden anymore.

back to GZIP compression because of new lvm binary

nandroid backup from&restore to 2ndROM (restoring to 2ndROM will take long because of the formatting inefficiency of the data image file)

new feature: mDNIe negative effect toggling via home button. press it 4 times to toggle. I hope you will find it useful for web browsers with white background.

update(1/6): wifi driver updates from sgs3 sources.

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2.6.4

new usb host driver. works fine with mouse, usb sticks and serial port adapters.

some wifi patches from n7000 sources. ioctl timeout is reduced from 20 secs to 5 secs.

fixed ntfs mounting and added ntfs-3g binary back. it will not be used if “ntfs mounter” app is installed. otherwise, ntfs sticks will be mounted read-only in /mnt/ntfs folder.

changed pegasusq governor defaults using AndreiLux’s settings. see this post for details

disabled force-install of superuser but I highly recommend you to “remove root” in extweaks and restart after flashing this kernel to prevent lockups and force-closes.

added scaling_min_freq and scaling_max_freq settings to extweaks. default is 100-1200MHz, battery profile default is 100-1000MHz, performance profile default is 200-1200MHz

just a little tweak to mdnie settings… see /sbin/ext/tweaks.sh for details

wifi signal strength/5GHz problems and some other small fixes & tweaks

legacy hotplug default for other governors than pegasusq and hotplug.

UPDATE: 29/5 wifi&mmc related fixes

Downloads:

CWM-Zip: Hier

Odin-Tar: Hier

SiyahKernel v3.2.5.2

Patch the firmware of certain Samsung emmc parts to fix a bug in the wear leveling code

fixed wifi not working with some country codes

bcmdhd: disable ESCAN_RESULT_PATCH again

disabled smooth scaling for all governors. you can enable it back using ExTweaks.

removed wifi scan interval tweak (it is commented in /sbin/ext/tweaks.sh for those who wants it back)

updated modem_if driver

force-install superuser.apk after flashing the kernel. this will be forced each time you flash a new version and it will happen only once for each version.

Download:

CWM-Zip: Klick

Odin-Tar: Klick

SiyahKernel v3.2.5.1

fixed some BLN problems, especially the one which causes the UI to be incredibly slow

kmemhelper binary to get/set some variables using kmem interface

added smooth level setting to ExTweaks. default is 800MHz and only effective for ondemand and pegasusq governors

removed some unused variables from pegasusq

modified pegasusq governor: made frequency_for_responsiveness (default: 100000) and up_threshold_at_min_freq (default:85) configurable and with their new default values they will not cause any rapid jumps

added hotplug governor

adjustable touchscreen thresholds. you will have to use init.d scripts until I receive some user feedback and prepare some presets for ExTweaks. check /sbin/ext/tweaks.sh for the example.

removed CPU and GPU undervolting from battery profile as it was causing crashes on some devices.

newer wifi driver

updated thunderbolt scripts and added some more tweaking which will be applied on startup.

linux 3.0.32

Downloads:

CWM-Zip: HIER

ODIN-Tar: HIER

SiyahKernel v3.2.4

enabled pegasusq governor. any other existing hotplug mechanisms will be disabled if you select it.

enabled smooth scaling for pegasusq governor

set pegasusq governor as default governor using extweaks settings. ondemand will still be the default governor for recovery.

set charging touch sensitivity movfilter value the same as battery movfilter value.

default lower freq level is set to 200MHz. do not use 25 or 50 if you are going to use pegasusq or ondemand.

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2.3

new feature: “fix permissions in 2ndROM” in dual-boot menu

new option: checkbox for “turn on the touchkey lights when the screen is touched” in ExTweaks

you will have an error when trying to flash to 2ndROM before running ‘Wipe 2ndROM data/cache’ at least once. you need to create 2ndROM data and cache files in your sdcard first.

set lulzactive default pump up/down steps depending on the frequency table step size. Default values will be initialized using the number of steps between 500MHz and 800MHz which is 3 with 18 steps.

rebased lulzactive logic on new interactive governor

new option: very simple CPU Undervolting in ExTweaks. -25, -50, -75, -100mV for all levels.

progress bar for “Wipe 2ndROM data&cache” if it is performed for the first time.

added adjustable mDNIe settings (thanks to sakura). you can use init.d script to modify the settings. the interface files are in /sys/devices/platform/samsung-pd.2/mdnie/mdnie/mdnie directory. echo 1 to user_mode and change “user_cb” and “user_cr”. default values are 128 and valid range is 0-255.

Downloads:

CWM-Zip: KLICK

ODIN-Tar: KLICK

SiyahKernel v3.2.2

added support for Boot-to-Gecko (b2g) (thanks to pulser)

slightly modified panel gamma set to have smoother transition for low-level lights and this will also help a little with the battery life when the screen is on.

removed LCD panel undervolting to prevent grayish tint with low brightness

enabled SCHED_AUTOGROUP once again

added “Wipe 2ndROM data/cache” to dual-boot menu in recovery. remember that it will take long if you do not have 2ndROM data and cache files in your sdcard.

led fade-in/fade-out effects. only fade-out is available in extweaks for now as fade-in implementation is not complete.

modified panel gamma set and added a lower brightness level as the first step. if you find it too low you can set min_gamma to 1 to have stock brightness level as in GB kernel.

Downloads:

CWM-Zip: HIER

ODIN-Tar: HIER

SiyahKernel v3.2.1

removed ntfs-3g from the payload part to make the kernel smaller (I want to enable LZO instead of GZIP). if you want ntfs-3g you can find it here

enabled kernel’s ntfs support to mount usb flashes in read-only mode

LZO, to have even faster booting

re-enabled j4fs and mounting of lfs partition (hellcat’s boot logo changer worked, even if it stuck with “working” popup, but it could successfully set my cat’s photo as a boot logo )

reverted 267MHz GPU voltage back to 1000mV. if you did not have a problem with v3.2, you can set it back to 950 (or even lower) with ExTweaks.

fixed vdd_levels interface. it was supposed to be using milivolts but I noticed that it was using microvolts when I tried to echoing it ‘-50′ to undervolt all steps by 50mV

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.2

Changelog:

removed nandroid backup from/restore to 2ndROM. There is a problem which I have just noticed and it will take some time to fix that. Use swap&backup until I fix it.

default lower cpu step is set to 100MHz

your extweaks settings will be automatically reset after flashing this version

used Linaro toolchain 4.7 (2012.04) which let me use gzip without exceeding 8MB

Downloads:

Odin-Tar: HIER

CWM-Zip: HIER
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[MOD] Siyah Kernel v3.0RC für ICS Galaxy S2 I9100

Hier sind die 3.2 RC-Versionen:

SiyahKernel v3.2rc2

Changelog:

disabled ESCAN_RESULT_PATCH in wifi driver

auto-reset extweaks profiles if customconfig.xml is changed

default i/o scheduler is set to sio for all profiles

increased brightness level for battery profile

undervolted gpu steps by 50mV in default profile

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2rc1

fixed “view status” in dual-boot menu

new feature: “Wipe 2ndROM dalvik cache”

changed dual-boot menu item texts a little to make them more clear

lots of code cleanups, especially BLN related

added ftdi_sio.ko (usb-to-serial converter module)

fixed “format secondrom_data” or “format secondrom_cache” not working if there is no /sdcard/.secondrom folder

merged usb host drivers with sztupy’s build 5 usb host driver changes

merged with Linux 3.0.31

Download:

Odin-Tar: HIER

CWM-Zip: HIER
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[Kernel] Siyah Kernel v3.0.x für ICS Galaxy S2 I9100

Hier sind die 3.2 Beta-Versionen:

SiyahKernel v3.2beta8

18-steps as default and default min-max CPU steps are set to 100-1200MHz.

multiple breathing steps for BLN, maximum 10 steps, asymmetric. see /res/customconfig/actions/bln_steps for examples.

fixed nandroid backup

new feature: “install zip to secondrom from internal sdcard” and “install zip to secondrom from external sdcard”.

if you want to install a ROM directly as SecondROM make sure you format “/secondrom_data” and “/secondrom_cache” before installing the ROM using this feature.

installing zips from dual-boot menu will prevent any kernel installation to avoid confusion and need to reflash siyahkernel back. original “install zip” feature will still flash kernels.

this feature assumes that you already have a SecondROM. or formatted /secondrom_data.and /secondrom_cache.

(for now) flashing from secondrom using any kitchen app or CWM app will not work. you will have to manually flash zips using dual-boot menu. I will try to implement this feature in the next version for complete second rom implementation. This part is also implemented. if you use a kitchen app, rom updater or CWM app in second rom the selected update will be flashed to the 2ndROM on boot.

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2beta7

added format SecondROM system, data and cache partitions.

enabled kernel panic timeout

nandroid backup of SecondROM

nandroid restore to SecondROM (kernel will not be restored if you restore to SecondROM). restoring data partition will take long because formatting a loop mounted image file takes long.

fixed wifi “Unable to handle kernel NULL pointer dereference at virtual address 00000000″ problem in wl_cfg80211_connect

lots of new patches&backports (for lowmemorykiller, bcmdhd and arm related) from myfluxi’s repo (thanks to myfluxi)

support for NTT-Docomo variant (you will need to “echo 16 > /proc/sys/kernel/rom_feature_set” to get gps working. I hope someone will prepare a flashable CWM file for ntt-docomo variant)

disabled smooth scaling for all governors except for ondemand

changed conservative governor settings a little

Download:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2beta6

added customvoltage interface to modify internal voltages because it is already supported by nstools (thanks to Ezekeel).

testing possible fix for “INFO: rcu_sched detected stalls on CPUs/tasks” (back to stand-hotplug)

fixed BLN breathing settings reverting when ExTweaks is launched.

added confirmation before backup actions in CWM recovery

added double-tap selection to CWM recovery

GB touch sensitivity when on battery.

Download:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2beta5

fixed some BLN problems

CM9 ROMs: lights will stay off after BLN if you disabled lights, stay on if you have them enabled.

if you set lights timeout, lights will turn on when you touch keypad or screen and turn off again after the timeout (just as in Samsung ROMs)

removed breathing setting and added bln_effect setting. available options are “steady”, “breathing” and “blinking”.

added breathing_start (mV), breathing_end (mV), breathing_period (ms), breathing_step (mV) interfaces to notification miscdevice. further customizations are possible by modifying those such as faster blinking or less brighter breathing.

touchscreen sensitivity is changed again :)

testing old GB hotplug (thanks to Entropy512 for porting it)

added touchpad led brightness level control to BLN tab in ExTweaks

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2beta4

new feature: breathing effect for native bln implementation. to enable: “echo 1 > /sys/class/misc/notification/breathing” it will only work when bln notification is active.

set touchscreen threshold settings to cm9 settings.

bln options configurable in ExTweaks app. we have enable/disable BLN checkbox, notification timeout, breathing on/off, led timeout (for cm9 or some AOSP roms which do not have led timeout settings) and testing BLN button.

make sure that you do not have blinking enabled if you want to use breathing effect in BLN. also, use only one notification timeout setting, either in ExTweaks or BLNPro app.

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2beta3

fixed BLN blinking in cm9

fixed touchscreen sensitivity problems when the device is on charge

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2beta2-2

updated bcmdhd wifi drivers.

fixed cpufreq_stats problems. if you change frequency steps, stats table will be recreated. since that change is meant to be made during boot I didn’t care about ActivityManager crashes. if you change freq steps while your device is running you will have a tiny soft restart of your UI because old stats table pointer will be stale.

increased gamma step count to 25 as in GB kernel to have smoother transitions.

fixed lulzactive problems because of dynamic freq step changes.

changed touch sensitivity values for charging state and set them the same as GB values

native aosp led notifications

led_timeout for cm9/aosp/aokp roms

merge with upstream Linux 3.0.30

ARM_UNWIND

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.2beta1

User selectable frequency table. Available frequencies are: (in MHz) 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 700, 600, 500, 400, 300, 200, 100, 50, 25. Default set is 1400, 1200, 1000, 800, 500, 200. You will be able to select 5-step(samsung default), 6-step(new SiyahKernel default), 7-step (new SiyahKernel default + 1500MHz), 8-step (old SiyahKernel Default), 9-step (old SiyahKernel Default + 1500MHz) or 18-step(all) in ExTweaks. If you want to have your own set you will be able to echo it to scaling_available_frequencies. The only limitation is that you won’t be able to delete 500, 800 and 1000MHz steps.

CIFS as module to decrease wlan_rx wakelocks

stripped modules to decrease module size

disabled custom smooth scaling because it would cause too much confusion with new dynamic freq steps.

gingerbread touch sensitivity values (on battery only)

Downloads:

CWM-Zip: HIER

Odin-Tar: HIER
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[Kernel] Siyah Kernel v3.1 für ICS Galaxy S2 I9100 Dual-Boot

Hier sind die 3.1 Stable/ReleaseVersionen:

SiyahKernel v3.1.2

Changelog:

fixed cm9 mount point problems

modifications in secondrom booting and mounting methods. you will be able to mount both sdcards using USB Mass Storage mode in the second ROM. just make sure you don’t delete “.secondrom” folder

cm9 as second rom should behave just the same as primary. no more emmc/sdcard swapping. removal of external sdcard will not affect functioning of any app.

merge with linux upstream (3.0.29)

Download:

CWM-Zip: HIER

Odin-Tar: HIER

SiyahKernel v3.1.1

Changelog:

applied latest cm9 initramfs changes

if you use cm9 as your second ROM, remember that internal sdcard location is /mnt/sdcard and it is fixed. you should have Settings->Storage->(Press menu)Storage Configuration->Use internal storage TICKED but the internal/external storage order will be reverse if you use cm9 as second ROM.

this kernel may not be compatible with some aokp based roms until they start using new cm9 convention for mount points. in that case use v3.1rc6.

increased min_free_kbytes to 16384 to see if it fixes wifi toggling issues (thanks to wjchen)

Download:

CWM-Zip: HIER

ODIN-Tar: HIER

SiyahKernel v3.1

Changelog (including the changes from all previous 3.1 beta and rc builds):

USB serial support

USB mouse and keyboard support and fixed crash on unplug (thanks to sztupy for his galaxy s kernel sources and kevinh for the patches)

latest CM9 support

new liblights which supports both Samsung and cm9 ROMs+kernels to prevent problems when users flash stock or speedmod kernels.

re-enabled CGROUP_TIMER_SLACK and SCHED_AUTOGROUP

disabled smooth scaling for interactive based governors (lulzactive and interactive)

Dual-booting

prevented tick sound after reboots or in download/recovery modes

sio fifo_batch=1

adjustable gamma and vibrator levels (thanks to myfluxi)

added gamma and vibrator level adjustments to ExTweaks app

removed 1600MHz and 100MHz steps

merged with cm9 sources (some patches for at&t version and lots of cleanups/rewrites. thanks to teamhacksung and Entropy512)

default I/O scheduler is set to CFQ.for default profile.

CIFS is now built-in, no longer a module, to save space

Superuser.apk, su, CWMManager.apk and ntfs-3g files are moved to the end of the kernel and won’t be decompressed unless they are needed to speed up the boot time.

samsung recovery binaries and some unnecessary files moved to the end of the kernel image to eliminate unnecessary decompression. those will be decompressed only when you boot into recovery, which will make the booting process faster.

Implemented clone primary to secondary, clone secondary to primary and swap primary/secondary ROMs in CWM Recovery

updated to linux 3.0.28

fixed ntfs automount for usb sticks. it will be mounted to /mnt/ntfs

changed “format /emmc” and “format /sdcard” to “format internal sdcard” and “format external sdcard” to prevent confusion. In CWM Recovery, /emmc is internal sdcard and /sdcard is the external.

not released yet

Download:

Odin-Tar: HIR

CWM-Zip: HIER
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[Kernel] Siyah Kernel v3.1 für ICS Galaxy S2 I9100 Dual-Boot

Hier sind die 3.1 Rc-Versionen:

SiyahKernel v3.1rc6

changed “format /emmc” and “format /sdcard” to “format internal sdcard” and “format external sdcard” to prevent confusion. In CWM Recovery, /emmc is internal sdcard and /sdcard is the external.

added back the vibration level setting (thanks to myfluxi for the fix)

fixed ntfs automount for usb sticks. it will be mounted to /mnt/ntfs

removed blnww temporarily because of the battery drain it causes

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.1rc5

Changelog:

fixed blnww problem

rebased on update4 sources (no upstream updates)

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.1rc4

Changelog:.

checked all freq and voltage interfaces and found no problem. make sure you remove boot settings and reapply after flashing rc2 or newer because the number of frequency steps has changed. we do not have 8 steps anymore, we have 6 steps. you have to update your init.d scripts or reapply boot settings accordingly. Just in case, I have added parsing 8-step freq settings and discard first and last settings and apply 6 in the middle.

added progress bar to cloning process.

new feature: swap primary and secondary ROMs. It takes about twice the time of a cloning process. This will help you to update your second ROM until I finish flashing zips to second ROM.

updated smooth_scaling defaults to new step level. (smooth_target=1, smooth_offset=2, smooth_step=2)

added available space checks to cloning and swapping ROMs.

updated to linux 3.0.28

BLN: fixed cm9 ROMs having touch lights off after BLN notification

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.1rc3

new feature: BLN without Wakelock (BLNWW). Disabled by default. You have to enable it using ExTweaks app.

default I/O scheduler is set to CFQ.for default profile.

CIFS is now built-in, no longer a module, to save space

Superuser.apk, su, CWMManager.apk and ntfs-3g files are moved to the end of the kernel and won’t be decompressed unless they are needed to speed up the boot time.

samsung recovery binaries and some unnecessary files moved to the end of the kernel image to eliminate unnecessary decompression. those will be decompressed only when you boot into recovery, which will make the booting process faster.

we are now back to gzip compression after moving unnecessary binaries to payload part.

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.1rc2

removed 1600MHz and 100MHz steps

merged with cm9 sources (some patches for at&t version and lots of cleanups/rewrites. thanks to teamhacksung and Entropy512)

updated the build script a little to fix the module loading issues (which is, by the way, the main root of wifi toggling issues)

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.1rc1

Changelog:

fixed sdcard problem in Hydrog3nICS

adjustable gamma and vibrator levels (thanks to myfluxi)

added gamma and vibrator level adjustments to ExTweaks app

removed 3 sec. delay if you don’t have a second rom installed.

adjustable mDNIe settings (again from myfluxi’s repository) but I have not added any ExTweaks options to modify them. there may be some scripts or apps available to do it for you. I am new to this mDNIe settings so if you ask me my answer is “I don’t know”.

fixed sdcard location for samsung based ROMs when they are used as second rom.

Download:

Odin-Tar: HIER

CWM-Zip: HIER
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[Kernel] Siyah Kernel v3.1 für ICS Galaxy S2 I9100 Dual-Boot

Hier sind die 3.0 Release/Stable-Versionen:

SiyahKernel v3.0.1

Changelog:

fixed Task Manager/Active Tasks issue

fixed module loading issue which was causing some weird problems such as fm radio not functioning or android logger not working.

added fs and readahead optimization parts of thunderbolt scripts back (thanks to [email protected])

set vitalij value to 5 for default and battery profiles, 3 for performance. You can use ExTweaks to customize it to your taste.

performance profile tweaks. you’ll have to reset profiles in CWM Recovery to be able to use new performance defaults.

adbd, init, recovery and lights.exynos4.so are recompiled using latest cm9 sources.

Download:

Odin-Tar: HIER

CWM-Zip: HIER


SiyahKernel v3.0

fixed android logger

added GENTLE_FAIR_SLEEPERS and ARCH_POWER config to ExTweaks interface

fixed kernel specific options in CWM Touch Recovery

added “Remove init.d scripts” option to kernel specific options menu

usb mass storage mode in CWM Touch Recovery (rc4 is updated for you to test this change)

used latest cm9 kernel’s (codeworkx’s) sensitivity values. works better than my previous values.

set SIO I/O scheduler as default

removed almost all external tweaking scripts of any kind

fixed FM radio problem in rc3 and rc4

Download:

Odin-Tar: HIER

CWM-Zip: HIER
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[Kernel] Siyah Kernel v3.1 für ICS Galaxy S2 I9100 Dual-Boot

Hier sind die 3.1 Beta-Versionen:

SiyahKernel v3.1beta3

Changelog:

fixed move2sd problem in CM9 and AO(S|K)P ROMs

mounted sdcard with utf8 (should fix some chinese or cryllic chars not being displayed correctly)

I recommend you to use move2sd feature only on the primary rom because there are lots of details which is really hard to explain here.

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.1beta2

Changelog:

fixed high memory usage

fixed booting Samsung ROMs as the second ROM

no need to fix CWM Manager backup issue. If you use any action in CWM Manager it will only boot to recovery because CWM Touch Recovery only works for the primary ROM. The commands are created in secondary ROM’s cache partition if you use CWM Manager in the second ROM, therefore they will be ineffective in the recovery mode.

re-enabled CGROUP_TIMER_SLACK and SCHED_AUTOGROUP

reapplied ondemandx patch (I forgot to put it back in v3.0 release. it should be the reason of having more battery drain with 3.0 than 3.0rc2)

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.1beta1

Changelog:

touchscreen sensitivity tweaks

sio fifo_batch=1

set default usb mode to mass_storage for MIUI ROMs.

disabled smooth scaling for interactive based governors (lulzactive and interactive)

prevented tick sound after reboots or in download/recovery modes

Dual-booting

For now, you will only have one additional option available in CWM Touch Recovery and that is cloning your primary ROM as secondary.

If you want to have another ROM as secondary ROM, follow these steps:

Make a nandroid backup of your existing ROM

wipe everything and install the other ROM

Boot the ROM and make customizations. Don’t forget to reflash SiyahKernel if the ROM flashes another kernel.

Use CWM Touch Recovery to clone your rom as secondary rom.

Restore nandroid backup


Keep in mind that you will not be able to flash additional CWM packages to the secondary ROM. Therefore, it is important that you have flashed all additional packages and customizations in the third step before you make the clone in the 4th step.

Some notes about dualbooting:

If you do not make any cloning you won’t be prompted to boot the second ROM.
you may need to reflash this kernel after a nandroid restore if your nandroid backup is created with another kernel.
there is no progress bar during the cloning process. it will be implemented later but for now, be patient because the size of data is huge and may take up to 10 minutes to clone.
there are some checks missing. for example if you do not have enough space in your internal sdcard (you need 2.1GB free space) you will not get a warning or error, but dual booting won’t work. remember, this is beta and not all features are implemented yet. In time, other dual-booting options in CWM Touch Recovery will be implemented.
you won’t be able to use mass storage mode for /sdcard in second rom because we have our data and cache partitions on /sdcard. only external sdcard will be mounted if you are using mass_storage mode. mtp should work fine for sdcard.
once again, you won’t be able to flash any CWM flashable zip to second ROM.

Download:

Odin-Tar: HIER

CWM-Zip: HIER
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[Kernel] Siyah Kernel v3.1 für ICS Galaxy S2 I9100 Dual-Boot

Hier sind die RC (Release Candidate)-Versionen:

SiyahKernel v3.0rc1

I recommend you to go into CWM Recovery and “Reset ExTweaks profiles” (in kernel specific options menu) after flashing the kernel.

Changelog:

used lights.exynos4.so which supports both Samsung and CM9 ROMs (thanks to myfluxi for making necessary modifications on it for CM9 part)

added back BLN support for CM9 based ROMs.

fixed touch screen sensitivity problem while charging

fixed CPU scaling problem and sleep-of-death issues with screen-scaling (script or SetCPU) (thanks to Entropy512 to find the main reason of the problem.
I have modified my code based on his patch and removed my previous workarounds)

ondemand governor is ondemandx now (it has a default screen-off profile with upper limit of 500MHz, configurable with ExTweaks app)

J4FS module (thanks to hardcore). I think Hellcat has an app in the market to let you change boot logo and that app needs this module to mount /mnt/.lfs

battery and performance defaults for uci.sh interface. the defaults are located in /res/customconfig folder. you can either copy them over /data/.siyah/default.profile or use “kernel specific options” menu in the recovery to select one of them as the active profile.

fixed MTP. It will work both on Samsung and CM9 now.

a new, hotplug aware governor… I didn’t test it much but the code seems good.
The only negative issue I noticed so far is that it is from Samsung (thanks to [email protected] for giving the heads up)

MIUIv4, cMIUI and AdyScorpiusMIUI support. (not fully tested though)

Added auto-install of ntfs-3g binary and we are back to XZ compression because of this addition, but with -1 flag to have fastest xz decompression.

Special thanks to [email protected] for his great help on testing this rc1. He had hundreds of SODs

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.0rc2

Changelog:

fixed touchkey lights staying off in CM9

fixed proximity sensor initialization problem (that battery sucking red little light near camera)

fixed the problem that prevents some zip files to be flashed in CWM Recovery

changed battery and performance defaults a little

added Entropy512′s fix to prevent cpu0 to be hotplugged

SLUB again

fixed issue with HydrogenICS (bootanimation, sdcard, MTP, etc)

slightly decreased touchscreen sensitivity threshold to have better experience while charging

Download:

Odin-Tar: HIER

CWM-Zip: HIER

SiyahKernel v3.0rc3

Changelog:

Increased TCP buffer size

Added support for ALL Samsung and CM9 based MIUI ROMs

merged with upstream 3.0.y, updated to 3.0.27 (thanks to [email protected] for the help with git)

removed pegasusq cpu governor

fixed theme flashing problems in CWM Recovery

fixed most of the lockups and freezes

increased touch sensitivity a lot. let’s see if this makes anybody unhappy…

Download:

Odin-Tar: HIER

Cwm-Zip: HIER
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
SiyahKernel v3.0beta1 für ICS Galaxy S2 I9100

Quelle: GokhanMoral - Siyah-Kernel

SiyahKernel v3.0beta1 for ICS

Do not use this kernel with a Gingerbread ROM. use v2.6.14 or v2.6.13 with GB. v3.0 is for ICS only.

Custom CWM touch recovery with swipe gestures

8 freq steps (100MHz to 1600MHz)

CPU underclock support

tweakable vitalij’s value (set to 5 as default)

fixed fuelalert wakelocks

you can disable android logger using ExTweaks app

you’ll have lots of options in ExTweaks. faster charging mode is one of them.

added conservative, interactive, lulzactive and smartass2 governors

gpu voltage, clock and stepcount interfaces. use ExTweaks from the market to configure them

tegrak’s touchmove support. you’ll have to tweak it with extweaks and test it with touchmove app until tegrak adds ICS support to the app.

brightness curve settings with original panel gamma values.

panel values unchanged, so you will get stock colors and will be able to use supercurio’s voodoo display app when it is released.

brightness modification will only change auto-brightness response.

BLN support added but we will need a supporting library. I’ll try to finish this in the weekend.

better touch sensitivity (especially while charging

SiyahKernel v3.0beta2 for ICS

Do not use this kernel with a Gingerbread ROM. use v2.6.14 or v2.6.13 with GB. v3.0 is for ICS only.

Custom CWM touch recovery with swipe gestures

CPU underclock support

tweakable vitalij’s value (set to 5 as default)

fixed fuelalert wakelocks

you can disable android logger using ExTweaks app, you’ll have lots of options in ExTweaks. faster charging mode is one of them.

added conservative, interactive, lulzactive and smartass2 governors

gpu voltage, clock and stepcount interfaces.

use ExTweaks from the market to configure them tegrak’s touchmove support.

you’ll have to tweak it with extweaks and test it with touchmove app until tegrak adds ICS support to the app.

brightness curve settings with original panel gamma values.

panel values unchanged, so you will get stock colors and will be able to use supercurio’s voodoo display app when it is released.

brightness modification will only change auto-brightness response.

better touch sensitivity (especially while charging

overclocking and bln support were removed temporarily.

SiyahKernel v3.0beta3 (for ICS only)

beta versions are tested (if they are tested at all ) only on stock samsung rom.

I highly recommend you to flash siyah-resetdefaultprofile.zip just after you flash this kernel.

enabled overclocking again.

I hope that I have managed to prevent the usage of 1400 and 1600MHz steps during and after boot, until the user sets them as the highest level.

fm radio should be working now

removed deep sleep parameters (cpu and busfreq levels)

re-enabled the missing governors in beta2 (lulzactive, conservative,smartassV2 and interactive)

disabled smooth_scaling on lulzactive and interactive governors, as it was in GB kernel

fixed undervolting problems.

lzma compression to have a smaller image to save bandwidth at the cost of a bit slower boot time.

re-enabled BLN support, but we still need liblights.


CWM-ZIP: HIER

Odin-TAR: HIER

siyah-resetdefaultprofile.zip

SiyahKernel v3.0beta4 (for ICS only)

full BLN support

fixed brightness problems

added SIO(default) and VR I/O schedulers

some config changes (RCU boost, autogroup, etc)

fixed recovery problems.
I advice you to recreate nandroid backups that you have created with beta versions or you’ll have to create md5 checksums manually.sorry for that. I noticed that I left some part of a script commented out while trying dual booting.

experimental mtp modifications to support both samsung and cm9 roms (thanks to codeworkx for the suggestion).
If it doesn’t work cm9 guys will have to wait until I find some more time to fix it.

Known problems:

this kernel doesn’t support any samsung rom prior to LPQ (this is not a problem but I wanted to mention this first)

you may have to use another bootloader to use this kernel (details @ XDA thread)

overclocking still have some problems. I will try to solve it in the next release. cpu doesn’t scale to higher frequencies.

Odin-TAR: HIER

CWM-Zip: HIER

SiyahKernel v3.0beta5

Once again, this kernel is for ICS ROMs only, but this doesn’t mean that it will support all ICS ROMs.
It supports only Samsung Stock ICS ROMs for now and maybe work on CM9 and recent CM9 variants.
If you have BLACK BLANK SCREEN after flashing this kernel then I am sorry that you will have to wait for your ROM developer to update the base or find another ROM if you want to use this kernel.

fixed GPU overclocking/undervolting problems

I think I fixed the problems with brightness curve (line actually, but it may not be completely linear because of min_bl setting. therefore, I still call it curve.

I was thinking about making it a second order polynomial.anyway.. this works and one my CS instructors told me to leave something alone if it worked.

almost all of my EE instructors think otherwise… well… we’ll see

some extweaks fixes (i/o schedulers added, some descriptions modified)

compiled with linaro toolchain 4.5-2012.03

CIFS

fixed overclocking problem (not using freq > 1200MHz)

Odin-TAR: HIER

CWM-ZIP: HIER

SiyahKernel v3.0beta6

I recommend you to reset extweaks settings from CWM Recovery advanced menu after flashing this kernel.

removed some tweaks to have better performance (sounds weird? yes, it does)

rebooting into download mode with cm9 phone options menu (holding the power button) is now working (yes, I am on CM9 now)

“Reset customconfig profiles” in CWM recovery “advanced” menu.

XZ compression

fixed MTP problem in CyanogenMod.
(Thanks to codeworkx. Although I didn’t do exactly what he suggested his suggestion made this possible). I hope I didn’t break Samsung part

RWSEM_XCHGADD_ALGORITHM

fixed adb in recovery mode

optimized CRC algorithm

CONFIG_TINY_SHMEM

removed powersave and userspace governors

enabled IKCONFIG

Odin-TAR: HIER

CWM-ZIP: HIER

SiyahKernel v3.0beta7

LZO compression for faster booting

SLQB

Charge current interface (thanks to Entropy512). You can now use currentwidget to see how fast your devices is being charged.

Tegrak’s 2ndCore app support (thanks to [email protected]) + ExTweaks interface to disable/enable/force hotplugging second core.

arm topology support (sched_mc) from linaro

CGROUP_TIMER_SLACK

enabled last_kmesg

lowered GPU lowest voltage level to 800mV

fixed hotplug rate setting in ExTweaks

removed autocopying of liblights for CM9 and clones. I will provide separate lights library for those ROMs

removed ntfs-3g binary from the kernel because we exceed 8MB size with LZO compression which is the fastest one. I’ll provide it as a CWM-flashable zip later.

fixed blank screen problem with custom dpi on cm9 based ROMs.

disabled MTP support for CM9 ROMs temporarily. use this app to get mass storage working on CM9: [APP/Hack] USB Mass Storage for Ice Cream Sandwich [v.1.2.0-pre - 02.02.2012] - xda-developers

fixed low benchmark with higher frequencies

Odin-TAR: HIER

Cwm-ZIP: HIER

WICHTIG: Das USP-Forum entzieht sich jeglicher Verantwortung, da das Modifizieren/Flashen seines Gerätes immer ein gewisses Risiko birgt, und somit auf eigene Verantwortung geschieht!
 
Zuletzt bearbeitet:
Magicsilence

Magicsilence

Mitglied
Dabei seit
13.07.2011
Beiträge
67
Ort
Schöningen
Modell(e)
Samsung Galaxy S2; LG Optimus 7; HTC Desire; Sony Ericsson c905
Netzbetreiber
D1, O2
Firmware
Immer anders...
PC Betriebssystem
Win 7
SiyahKernel v3.0beta1 für ICS Galaxy S2 I9100

Und der BETA 2 ist raus^^
 
M

Mr. Green

Gast
[MOD] SiyahKernel v3.0beta1 für ICS Galaxy S2 I9100

Nein ist leider nicht so.
Es ist lediglich ein Blog geschrieben worden, der auf die Änderungen der BETA2 hinweist.

Gruß
 
P-Yeah

P-Yeah

Mitglied
Dabei seit
09.12.2011
Beiträge
177
Ort
Niedersachen
Modell(e)
Samsung Galaxy S 2
Netzbetreiber
T-Mobile
PC Betriebssystem
Windows 7 Ultimate x64
[MOD] SiyahKernel v3.0beta1 für ICS Galaxy S2 I9100

Das kann doch nich sein...
bin grad aufgestanden,heute nen tag frei, will grad den kernel laden. WEG.
Vor 2 min. hab ich erst noch den download hier gesehen^^
Toll, dann kann ich noch 2 Tage warten.
Egal Beta läuft besser..
 
Zuletzt bearbeitet:
M

Mr. Green

Gast
[MOD] SiyahKernel v3.0beta für ICS Galaxy S2 I9100

V3 - Beta7 eingefügt
 
Zuletzt bearbeitet:
A

arrow

Mitglied
Dabei seit
19.11.2009
Beiträge
99
[MOD] Siyah Kernel v3.0RC für ICS Galaxy S2 I9100

Mein S2 Startet mit dem SiyahKernel v3.0rc3 nicht mehr.

Habe jetzt wieder den SpeedMod Kernel drauf und damit startet es.#

Woran kann das liegen?
 
BurnMaster77

BurnMaster77

Gesperrt
Dabei seit
27.07.2009
Beiträge
2.715
Modell(e)
Samsung Galaxy S2; iPad 3 64GB 4G
Netzbetreiber
Telekom (MobilCom)
Firmware
4.0.3 XWLPD Pure ICS ROM v7.4
PC Betriebssystem
Win7 Ultimate x64
[MOD] Siyah Kernel v3.0RC für ICS Galaxy S2 I9100

Hab im Post #1 mal die Downloadlinks für den Final 3.0 Kernel eingefügt.

Gruß
 
A

arrow

Mitglied
Dabei seit
19.11.2009
Beiträge
99
[Kernel] Siyah Kernel v3.0 für ICS Galaxy S2 I9100

Stock Rom Android 3.2.5
 
BurnMaster77

BurnMaster77

Gesperrt
Dabei seit
27.07.2009
Beiträge
2.715
Modell(e)
Samsung Galaxy S2; iPad 3 64GB 4G
Netzbetreiber
Telekom (MobilCom)
Firmware
4.0.3 XWLPD Pure ICS ROM v7.4
PC Betriebssystem
Win7 Ultimate x64
[Kernel] Siyah Kernel v3.0 für ICS Galaxy S2 I9100

Der Siyah Kernel 3.x.x ist nur für ICS 4.x.x ROM´s gedacht.
Für 2.x.x ROM´s brauchst Du den 2.x.x Siyah Kernel.

Gruß
 
A

arrow

Mitglied
Dabei seit
19.11.2009
Beiträge
99
[Kernel] Siyah Kernel v3.0 für ICS Galaxy S2 I9100

Danke ;)

Finde leider die 2er Version nicht gibts die hier im Forum?

Lg Marc
 
Thema:

[Kernel] Siyah-Kernel Galaxy S2 I9100 Dual-Boot

[Kernel] Siyah-Kernel Galaxy S2 I9100 Dual-Boot - Ähnliche Themen

new emoji stickers for whatsapp: Emoji sticker is the app where you can easily search for all those emojis which we can use on regular basis like Laughing ,sad ,fire ,Crying...
Android 8.0 / 8.1 frp bypass 30.03.2019: English manual below Hey, Ich bin neu hier und hoffe das ist der richtige Bereich. Ich habe vielleicht einen neuen Weg gefunden Frp zu umgehen...
Versandkostenfrei aus DE Original XIAOMI MI Band 3 Smart Wristband,€33.99: ♦ 0.78 Inch OLED Touch Screen: Bigger screen, fit the width of the wrist, bring pleasant feeling of wearing. Big screen display a comprehensive...
Versandkostenfrei aus DE Original XIAOMI MIJIA ROBOROCK S50,€369.99: ♦ 2 in 1 Sweep and Mop: Double cleaning: sweep first and then mop the floor ♦ Intelligent Route Planning: Laser Distance Sensor ( LDS ) allows...
Versandkostenfrei aus DE Original XIAOMI MIJIA ROBOROCK S50,€364.99: ♦ 2 in 1 Sweep and Mop: Double cleaning: sweep first and then mop the floor ♦ Intelligent Route Planning: Laser Distance Sensor ( LDS ) allows the...

Sucheingaben

siyah-s2-v4.1.5-cwm.signed.zip download

,

siyah kernel galaxy s2 download

,

siyah kernel galaxy s2

,
siyah kernel
, siyah kernel download, Siyah-s2-v4.1.5-CWM.signed.zip , galaxy s2 siyah kernel download, galaxy s2 siyah kernel, samsung galaxy s2 siyah kernel 3.x.x, samsung galaxy s2 dual boot, siyah kernel sgs2 download, download siyah-s2-v4.1.5-cwm.signed.zip, siyah kernel i9100, siyah kernel galaxy s2 ics, siyah xda, download siyah kernel galaxy s2, galaxy s2 dual boot, Siyah Kernel 3.2, siyah kernel 4.0.3, init.d kernel i9100, siyah dual boot, siyah kernel dual boot , samsung galaxy s2 siyah kernel download , siyah kernel s2, dual boot samsung galaxy s2
Oben