M
Mr. Green
Gast
[ROM]USP-Forum Custom-Rom v1
Nach langer Einarbeitungszeit und einigen Anlaufschwierigkeiten, darf ich Euch die erste USP-Forum Custom-Rom, basierend auf der XWLA4,vorstellen.
Ich will mich an dieser Stelle gleich mal sehr Herzlichst an Robbie bedanken, der mich zu dieser Idee verleitet hat und mich dabei sehr Unterstützt hat.
Rom-Infos:
Basiert auf XWLA4
USP-Forum-Bootanimation: http://www.usp-forum.de/samsung-gal...-usp-bootanimation-f-r-samsung-galaxy-s2.html
RedPill-Kernel1.3 (näheres dazu später)
ICS-Blue-Themed (Danke an Krinyo von XDA) > nicht Kompatibel mit JKayMod
Deodexed
Zipaligned
Root
Busybox
CWM-Manager
LauncherPro
MiuiMusic
MiuiCalculator
(beide aus der MIUI-Rom: http://en.miui.com/)
Hacked-Kamera mit verbesserter Audio- und Videoqualität, Aufnahmen auch bei niedrigen Akku möglich: http://forum.xda-developers.com/showthread.php?t=1234575
Großteil der Samsung-Apps entfernt inkl.Touchwiz
Market 3.4.4
/data/app - Unterstützung - vorinstallierte App's:
BLN-Control
TitaniumBackup
VoltageControl
ES File-Explorer
zipalign beim Boot
Akkukalibrierung beim Boot
Datenbank-defragmentierung beim Start
Ramverwaltung optimiert
Ramnutzung optimiert
Automatisch Dalvik-Cache säubern
Logging deaktiviert
Stromverbauch verringert/Batterielebensdauer erhöht durch „SysCtl“ aktiviert
SD-Cardzugriffe optimiert
USB-Speicherzugriffe optimiert
Verbesserter Deep-Sleep
Net-TCP-Puffergrösse optimiert für schnelleres Mobiles Internet
3G/W-Lan Geschwindigkeit minimal erhöht
Aufnahmequalität der Bilder und Videos zusätzlich minimal gesteigert
Sprach- und Telefonie-qualität etwas erhöht
Qualität der Spracheingabe verbessert
Touch-Screen Genauigkeit/Sensibilität minimal verbessert
GPS-Leistung gesteigert, Lokalisierung bis 5m genauigkeit
Dalvik-Cache verkleinert auf 48MB
„Regulierungsdomäne“ aktiviert, zu finden in den Erweiterten Einstellungen des W-Lan, damit ist es möglich die Anzahl der verwendeten W-Lan-Kanäle festzulegen
„Developer only - Akkuwarnanzeige“ aktiviert, zu finden im Task-Manager unter Speicher, damit ist es möglich den Akkuverbrauch genau zu loggen
Vorkonfigurierte Voltage-Settings
RedPill-Kernel:
[KERNEL][14FEB'12]RedPillKernel_Rev1.3[RedPillTouchCWM Recovery by AF974]"TAKE IT!" -xda-developers
Ich will mich an dieser Stelle gleich mal sehr Herzlichst an Robbie bedanken, der mich zu dieser Idee verleitet hat und mich dabei sehr Unterstützt hat.
Rom-Infos:
Basiert auf XWLA4
USP-Forum-Bootanimation: http://www.usp-forum.de/samsung-gal...-usp-bootanimation-f-r-samsung-galaxy-s2.html
RedPill-Kernel1.3 (näheres dazu später)
ICS-Blue-Themed (Danke an Krinyo von XDA) > nicht Kompatibel mit JKayMod
Deodexed
Zipaligned
Root
Busybox
CWM-Manager
LauncherPro
MiuiMusic
MiuiCalculator
(beide aus der MIUI-Rom: http://en.miui.com/)
Hacked-Kamera mit verbesserter Audio- und Videoqualität, Aufnahmen auch bei niedrigen Akku möglich: http://forum.xda-developers.com/showthread.php?t=1234575
Großteil der Samsung-Apps entfernt inkl.Touchwiz
Market 3.4.4
/data/app - Unterstützung - vorinstallierte App's:
BLN-Control
TitaniumBackup
VoltageControl
ES File-Explorer
zipalign beim Boot
Akkukalibrierung beim Boot
Datenbank-defragmentierung beim Start
Ramverwaltung optimiert
Ramnutzung optimiert
Automatisch Dalvik-Cache säubern
Logging deaktiviert
Stromverbauch verringert/Batterielebensdauer erhöht durch „SysCtl“ aktiviert
SD-Cardzugriffe optimiert
USB-Speicherzugriffe optimiert
Verbesserter Deep-Sleep
Net-TCP-Puffergrösse optimiert für schnelleres Mobiles Internet
3G/W-Lan Geschwindigkeit minimal erhöht
Aufnahmequalität der Bilder und Videos zusätzlich minimal gesteigert
Sprach- und Telefonie-qualität etwas erhöht
Qualität der Spracheingabe verbessert
Touch-Screen Genauigkeit/Sensibilität minimal verbessert
GPS-Leistung gesteigert, Lokalisierung bis 5m genauigkeit
Dalvik-Cache verkleinert auf 48MB
„Regulierungsdomäne“ aktiviert, zu finden in den Erweiterten Einstellungen des W-Lan, damit ist es möglich die Anzahl der verwendeten W-Lan-Kanäle festzulegen
„Developer only - Akkuwarnanzeige“ aktiviert, zu finden im Task-Manager unter Speicher, damit ist es möglich den Akkuverbrauch genau zu loggen
Vorkonfigurierte Voltage-Settings
RedPill-Kernel:
[KERNEL][14FEB'12]RedPillKernel_Rev1.3[RedPillTouchCWM Recovery by AF974]"TAKE IT!" -xda-developers
Initramfs fromLA2 Samsung kernel-update3(patched for deep sleep fix) Based on Arighi sources(arighi) + a LOT of patches included by pongster for performance,stability and battery life Custom ClockworkMod BasedRecovery v5.0.2.7 by AF974 based on Team Overcome Recovery (thanksto alterbridge and AF974) Instant root (modded scriptby gokhanmoral of SiyahKernel with a few edits by pongster toensure latest SU apk and binary are used.) Newest Superuser 3.0 and subinary (thanks to chainsdd) Touchscreenfix set to "3"(vitalij) Init.d support VooDoo Louder Support bysupercurio 2nd Core and Touch Move byTegrak Support SetCPU and Voltage ControlSupport Full CWM Manager 3.0 Supportby Chainfire CPU & GPU Overclockingand Undervolting by Netarchy Highly Experimental Ondemandbased CPU Governors (Minor Edits only/Renamed to keep bugs on theexperiments) based on arighi's deep_sleep and fast_startcommits Maximum CPU Freq set at1.5Ghz Enable or Disable FileSyncing (fsync enabled by default) CFS Autogroup by MikeGalbraith Enabled CPU Topology and Sched_MCenabled AFTR and LPAenabled A lot of tunables via sysfsincluded Undervolted Int ARM and TouchLED Values (thanks to Phenomenal for the idea) Git Implementation of SHA-1for 12% faster boot time CPU set at 1.2Ghz at Boot forfaster boot time (Thanks to Imoseyon) XZ compressed kernel usingoptimized values for the size of the kernel Uncompressed Initramfs(tweaked scripts/gen_initramfs.sh) NTFS Read/Write Support forOTG (Flash Drives and External Hard Drives with enough Powersupported) CIFS and FUSE Support |Tweaked Ext4 Filesystem SIO | noop | deadline | V(R)(tweaked for better throughput and balanced latency for MobileNAND based devices) sleepy | hyper | conservative| ondemand CPU Governors generic cpufreq rangeregulation (arighi) | BLN support (Thanks to creams and neldar) |Fuel Guage Wakelock fix by Entropy512PowerSavingFeatures:
AFTR + LPAenabled sched_mc enabled ARM CPU Topologyenabled CPU Hotplugging OFF whenscreen off enabled (Thanks to arighi) RCU Fast No HZenabled Stable Voltage Tweaks forInternal Voltages (not ARM Voltage which remain stock) to helplessen heat when in heavy usage scenariosBootTimeFeatures:
Used git Implem of SHA-1 for12% Boot time improvement Added [PATCH] arm: remove"optimized" SHA1 routines by Linus Torvalds Added [PATCH] arm: removestale export of 'sha_transform' Linus Torvalds Uncompressed initramfs (sinceinitramfs is compressed as part of the kernel image, this isreduced to a copy operation from a decompress then copyone) Set Clockspeed at 1.2Ghz atBoot time to ensure all critical tasks have enough power toperform them while the governors/maxfreq isn't set yet. (Thanks toImoseyon for this hack)CPUFeatures
CPU and GPU OC/UV thanks tonetarchy/HacreCPUGovernorsIncluded:FinalCleanupof CPU Governors available for simplicity. (all Governorsaretweakedfor the best possible balance of battery and performancewitha slightlean towards performance) With this focus onsimplicitystated earlier,the only governors available are thefollowing:
sleepy (ondemand based cpugovernor with minor edits by pongster) loves to sleep and idle atthe lowest set frequency, hence the name change from "solo"to "sleepy". Its closer to ondemandx in terms ofperformance. This can be tweaked and tuned using init.d scripts aswell. hyper (ondemand + suspendfreq setting ability with minor edits by pongster) This wasformerly the original kenobi which I renamed to hyper as othersmay not get the Star Wars Reference. It gives a good balancebetween battery life and performance. Its closer to ondemand interms of performance. also tunable using init.dscripts. conservative (good batterysavings by default due to its slow ramp up and ramp down buttunable for performance) defaults are slightly tweaked for betterperformance than default conservative. ondemand (old reliable thatsbeen tweaked by arighi to support deep_sleep and fast_start) thesefeatures try to detect if the CPU is coming from a deep sleep andis more likely to sleep again and thus limits its frequency to thelowest possible that can handle the operations needed. fast_startchecks if the CPU needs more "ooomph" and jumps to thehighest frequency faster to enable it to complete the operationthe system needs to complete. (like duringboot-up)3rdPartyKernelApps Support
CWM Manager 3.0 (It workswell for me. Its a useful app by Chainfire that extends thefeatures of the current recovery. No need to reinvent the wheel,so to speak) Voodoo Louder bysupercurio Voodoo Display (for futuresupercurio app) 2nd Core byTegrak Touch Move byTegrak SetCPU bymichaelhuang Voltage Control byxanFilesystemFeatures(loadedby default to prevent the load insmodding at bootwill cause,howeverminor)
CIFS FUSE NTFS
Experimental NTFS automountfor OTG devices (you'll have to do a little more work to enablesdcard as ntfs) (Thanks to gokhan for the hotplug script as base.)This script uses the native NTFS RW support available in t hekernel instead of ntfs-3gExt4Tweaksfrom3.x.x branch:I/OSchedulers
SIO (2012 0.2version) deadline (tweaked forFlash) noop V(R)
Download: USP-Rom
MD5: f092dce8b7fc7ba5eae7db9500abc29c
Zuletzt bearbeitet von einem Moderator: